Gas filled latex balloons have a limited life (6 - 16 hours
depending on temperature - the cooler it is, the longer they
float). They should ideally be inflated just prior to display.
The DIY Kit is the ideal solution.
Inflation cost (per balloon) reduces
as purchase volume increases. You
can buy even better if you buy a
"Party Kit" comprising gas, balloons
and clipped ribbons in matching
colours.
All gas bottles are supplied with a
regulated "tilt " valve that makes
inflation child's play. Simply fit the
neck of the balloon over the rubber
Tilt Valve nozzle and tilt the nozzle
sideways. When the balloon is fully
inflated, release the valve.
DO NOT over inflate your balloons or you will run out of
gas. You may remember from school that the volume of a
sphere goes up as the cube of the radius. Small change in
diameter - big change in volume!
TURN GAS BOTTLE OFF AT VALVE WHEN FINISHED
INFLATING (AVOIDS LEAKAGE)
WARNING - Balloon gas (Helium) should only be used under adult
supervision MORE >
DO YOU NEED TO ORDER ANY BALLOON WEIGHTS?
DIY Party Kits - Available in mixed colours or
matched to your selected colour theme - balloons,
gas, clips, and ribbons.
© Balloons Plus Coffs Harbour 2022